Filter by
Categories
Price
Filter

Vibiemme - Brewing group

There are a variety of brewing groups used by the brand Vibiemme. In total the brand Vibiemme(VBM) uses 4 types of brewing groups.

  •          E61 lever brewing group;
  •          E61 solenoid brewing group;
  •          Automatic solenoid brewing group;
  •          Manual lever brewing group.

Vibiemme E61 lever brewing group. This brewing group is a manual operated brewing group based on the Faema E61 brewing group. It has a lot of similarities, but also a lot of differences in comparison to the original. This group is used on the Vibiemme Cubo, Vibiemme Domobar, Vibiemme Domobar Junior, Vibiemme Domobar Super and the Vibiemme Replica.

Vibiemme E61 solenoid brewing group. This brewing group is based on the manual E61 brewing group of Vibiemme. But is not operated manually but with a solenoid valve.  This brewing group is used on the Vibiemme Chimaera, Vibiemme Cubo, Vibiemme Domobar Super, Vibiemme Dosaplus, Vibiemme Mercury, Vibiemme Replica and the Vibiemme Revolution.

The Vibiemme automatic solenoid brewing group is the only modern brewing group by Vibiemme which isn’t solely based on the E61 style of group head. This group head is a solenoid valve operated group and has a lot of similar parts. You can find this group on the Vibiemme Evolution, Vibiemme Kometa, Vibiemme Lollo, Vibiemme Minimax and the Vibiemme Silver.

The lever operated brewing group, so not based on pump pressure. You can find more info about this brewing group on our other website brooks-espressomachines.com

Vibiemme spare parts - brewing group

Locking group gasket

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
€4.02

Portafilter gasket 73X57X8.5mm

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...
€3.34

E61 cam lock stainless steel m6

This stainless steel cam lock prevents you from turning the camme shaft on the E61 and E61 style group too far. It has a male M6 thread on one side, the other side has a slit to screw the part in the Brewing group with a flat head screwdriver. This coffee machine parts is being used with a variety of brands like: Bezzera 7479951, Brasilia 13651.0.40.04,...
€5.29

Vibiemme upper sleeve

This Vibiemme RACCCASUTEPI chrome plated drain sleeve is unique for e E61 style brewing group. Vibiemme is the only espresso machine manufacturer who uses this principle. This is being used for the Lever as well for the Solenoid brewing group. Instead of the screw in drain sleeve, as being used by brands like Faema, Bezzera, La Pavoni, La Scala and...
€34.23

Vibiemme solenoid group locking gasket

The group locking gasket on this product page is used with a variety Vibiemme solenoid groups. The Vibiemme part reference for this item is GUARGRKO. This paper gasket is rectangular with 5 holes. The gasket is 72mm with 64 mm and a thickness of 2mm. This gasket has been made in Italy. You can use this group locking gasket on the Vibiemme Evolution,...
€4.02

E61 style camme rod

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
€16.14

E61 chromed group collector

The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61 This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....
€52.47

AFM 34 gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.03