Vibiemme E61 style solenoid
The shower screen on this page is one of the most commonly espresso machine shower screens used in commercial espresso machines. For instance on all E61 types of brewing groups. This specific shower screen has been made by the Italian company IMS Filtri. The IMS part reference for this item is IMSDR306. Note: this is not a competition shower screen.
This...
€3.27
Portafilter gasket 73x57x9mm
Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)
The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€3.33
Vibiemme upper sleeve
This Vibiemme RACCCASUTEPI chrome plated drain sleeve is unique for e E61 style brewing group. Vibiemme is the only espresso machine manufacturer who uses this principle. This is being used for the Lever as well for the Solenoid brewing group. Instead of the screw in drain sleeve, as being used by brands like Faema, Bezzera, La Pavoni, La Scala and...
€34.23
Vibiemme single coffee portafilter original
The single portafilter shown on this product page is a OEM/Original Vibiemme espresso machine spare part. The Vibiemme part reference for this item is ASPORTN1TBMON.
This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 90 degree. The thickness of these ears is 5,5mm. The portafilter comes with a...
€89.61
Parker 3 way solenoid valve 230V 50/60Hz with cable
On this product page you will find a parker 3 way solenoid valve which is slightly different then a conventional solenoid valve. This solenoid valve is mainly used on solenoid brewing groups of the brand Vibiemme. What makes it so different? This solenoid valve is pre-wired. The Parker part numbers of this item are 393134J and 393395J
This solenoid valve...
€110.76
PTFE gasket 25.4x21.2x5.5mm
This flat Polytetrafluoroethylene (PTFE) gasket 25.5x21x5mm is used on Vibiemme (GUARCASUTEPI) espresso machine brewing groups. As well in the manual lever brewing group as well for the solenoid group. This part seals off the bottom off the upper sleeve in the brewing group.
If you are not sure if this item will fit your Vibiemme Domobar, Vibiemme Replica...
€4.01
PTFE gasket 26x21x2mm
This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.10
Filterholder gasket 73x57x8mm
On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac.
This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy.
You can use...
€4.94
Filterholder suplement gasket 73x59x0.8mm
The paper shim on this page is one of the most widely used paper shim. You can use this type with a wide selection of espresso machine brewing groups.
What are the dimensions of this paper shim? They have a outer diameter of 73mm, a inner diameter of 59mm and a thickness of 0,8mm.
What does a paper shim do? Brewing group locking mechanisms wear due to...
€0.52
O ring gasket 6.07x1.78mm Solenoid valve
This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps.
The o ring has a wire diameter of 1,78mm and a internal...
€0.48
Locking group gasket
If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...
€4.02
E61 style group spout breaker
On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm.
What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€5.08