Vibiemme Replica lever group parts

In some cases, the shower screen is attached with a screw, in most cases that is a Philips or a slotted screw. It is difficult to remove it with a regular screwdriver due to the limited height under the brew group.  But for that you need a shortened slotted screwdriver, in this case the one from the German brand Wera, which fits well under the brewing...

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

The shower screen on this page is one of the most commonly espresso machine shower screens used in commercial espresso machines. For instance on all E61 types of brewing groups. This specific shower screen has been made by the Italian company IMS Filtri. The IMS part reference for this item is IMSDR306. Note: this is not a competition shower screen. This...

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...

The single portafilter shown on this product page is a OEM/Original Vibiemme espresso machine spare part. The Vibiemme part reference for this item is ASPORTN1TBMON. This single portafilter has a open spout, this make it easier to clean your portafilter. The ear orientation is 90 degree. The thickness of these ears is 5,5mm. The portafilter comes with a...

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....