Vibiemme Replica lever group parts

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...

On this page you will find a portafilter gasket suitable for a variety of brands such as Faema, San Remo, Cimbali, Vibiemme, La Scala, Bezzera, Pavoni and Isomac. This portafilter gasket has been made from NBR. The outer diameter is 73mm the inner diameter is 57mm and the thickness of this gasket is 8mm. This gasket has been made in Italy. You can use...

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...

This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....

This flat Polytetrafluoroethylene (PTFE) gasket 25.5x21x5mm is used on Vibiemme (GUARCASUTEPI) espresso machine brewing groups. As well in the manual lever brewing group as well for the solenoid group. This part seals off the bottom off the upper sleeve in the brewing group. If you are not sure if this item will fit your Vibiemme Domobar, Vibiemme Replica...

This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61 style group is...

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....

The Vibiemme RACCCACOGR camme shaft holder on the manual Vibiemme espresso machines is also quite different then with a standard E61 style brewing group. This part is, similar to the drain sleeve, attached to the side of the brewing group with 2 M6 allen bolts. In the situation of the Vibiemme solenoid valve group in E61 style, this is a chrome plated...

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....