Filter by
Categories
Price
€ €
Manufacturers
Filter

Vibiemme Part Category

On this category page you will find a wide selection of spare parts for Vibiemme espresso machines. This does include domestic and commercial espresso machines.

The espresso machines of VBM have a variety of steam/water valves, brewing groups, water inlet valves, electronics and heating elements.

Which is compatible with your espresso machine model depends on if it is a domestic espresso machine or a commercial. Seen the parts are different on a VBM Domobar then on a VBM Replica espresso machine.

You will find spare parts for VBM models such as the Vibiemme Cubo, Vibiemme Replica, Vibiemme Domobar Super, Vibiemme Chimaera, Vibiemme Silver, Vibiemme Evolution and the Vibiemme Lollo.

Vibiemme (VBM) espresso machine parts - part category
Elbow fitting 1/4" MM Elbow fitting 1/4" MM

Elbow fitting 1/4" MM

The item on this page is a brass elbow fitting. This fitting can be used on various espresso machine brands such as Faema and Vibiemme. The Vibiemme part reference for this item is RACCP429. This elbow fitting has on both sides a ¼” BSP-G thread. But on 1 side it has a flared connection instead of a conical connection. This item has been...
€8.21
compare
Quick-view
Vibiemme dosing device 3d5 Plus 3 PID 240V Vibiemme dosing device 3d5 Plus 3 PID 240V

Vibiemme dosing device 3d5 Plus 3 PID 240V

This dosing device Dosatura 3d5 Plus 3PID 240Vac, with the Gicar code 9.5.22.37G is being used for Vibiemme espresso machines (ELETDOSKIMREP). Mainly for the dual boiler espresso machines Vibiemme Replica and Vibiemme Chimaera. The dosing device runs on 240Vac with 50/60Hz and is suitable for Vibiemme espresso machines up to 3 brewing groups. If you are...
€592.22
compare
Quick-view
Microswitch Rold VRSRB1DA1 Microswitch Rold VRSRB1DA1

Microswitch Rold VRSRB1DA1

This microswitch can be used with a huge variety of coffee grinders. This ranges from Casadio, San Marco, La Cimbali, Vibiemme, Cunhill, Eureka, La Spaziale, Brasilia and so on. For the complete list check the extra info tab for brands, models and product codes The specific microswitch is mainly used as a doser microswitch in the coffee doser. This...
€7.27
compare
Quick-view
Anti vacuum valve V.A.R. 1/4" Anti vacuum valve V.A.R. 1/4"

Anti vacuum valve V.A.R. 1/4"

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€8.70
compare
Quick-view
E61 style group spout breaker E61 style group spout breaker

E61 style group spout breaker

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....
€5.08
compare
Quick-view
Silicone gasket 12.3x5.6mm Silicone gasket 12.3x5.6mm

Silicone gasket 12.3x5.6mm

This blind gasket can be found on a variety of steam and water valves. You can find this blind gasket with brands such as La Scala, Marzocco, La Carimali, San Remo, Vibiemme, La Pavoni and BFC. The part references can be found in the extra info tab. This gasket is made from red silicone. The gasket has a outer diameter of 12mm and a height of 5.8mm....
€0.86
compare
Quick-view
Valve guide square 12,1mm 6x6mm m3 Valve guide square 12,1mm 6x6mm m3

Valve guide square 12,1mm 6x6mm m3

The item on this product page is a square brewing group/valve pin. This valve pin can be used on various brands such as Vibiemme, Faema, Pavoni and Wega. The Vibiemme part references are RACCGAVAERQU and RACCGAVAINQU, for Wega the reference is WY27421012, for Pavoni the references are 312225 and 312227. For Faema the references are...
€1.25
compare
Quick-view
AFM 34 gasket 26x21x2mm AFM 34 gasket 26x21x2mm

AFM 34 gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.03
compare
Quick-view
Safety valve 3/8'' 1,8 bar Safety valve 3/8'' 1,8 bar

Safety valve 3/8'' 1,8 bar

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...
€12.18
compare
Quick-view
Vibiemme dosing device 3D 2GRC 230V Vibiemme dosing device 3D 2GRC 230V

Vibiemme dosing device 3D 2GRC 230V

The dosing device on this page can be used on various Vibiemme espresso machines. The Vibiemme part reference for this item Is ELETDOS3D2GSI. This device has been made by the Italian company Gicar, their part reference is 9.5.14.67G01 and 9.5.14.67V01. This unit is suitable for max 2 group espresso machines. The name of this model is 3D-2GRC-SILVER. It...
€263.83
compare
Quick-view
Complete valve spout 54,6mm Complete valve spout 54,6mm

Complete valve spout 54,6mm

This complete spout valve is located in the top section of a E61 style brewing group. Used on the E61 style groups like the lever group made by VBM ASSVALVEROG, Brasilia 09453.4.00.09, ECM Heidelberg C219900424 and Expobar CTAV1-24 brewing groups. This spout is a assembly out of multiple items, the round shaft, gasket holder, gasket and the square pin on...
€9.73
compare
Quick-view
Lever switch 16A 250V Lever switch 16A 250V

Lever switch 16A 250V

This classical style of on/off switch can be used with brands such as ECM Heidelberg and Vibiemme. The ECM Heidelberg part reference is C199900087 and the Vibiemme part reference is ELETINTLEVMET. This switch is a toggle switch which has been rated up to 16A at 250V. The hole diameter for this switch is 12mm. You can use this switch on the Vibiemme...
€32.81
compare
Quick-view