Filter by
Price
La Cimbali
more... less
Type part
Voltage
Filter

La Cimbali - Steam/water valve

The steam and water valves used on La Cimbali espresso machines are almost the same over the years. There are small differences in the valves for some models. Such as a conical or flat inlet of the valve or a steam/water outlet on the La Cimbali M39 which is on a 90 degree angle where as the “Standard” size is slightly sloped. Besides this valve you also got solenoid valve operated water outlets.

How does the manual la Cimbali steam valve work? The valve itself has a body, with threads on the inside. In that valve you can screw a steam/water valve shaft. This shaft already has the sealing o rings and gaskets installed to it(there are 2 versions, with and without screw to hold the gasket). To hold the shaft in place, to prevent accidental removal, there is a washer and a C clip installed.

The steam and water tubes used on La Cimbali espresso machines do vary a lot. The water tubes vary in size and length and if they have a water filter inside of them. The Steam tubes have remained over time relatively the same, do pay attention to the thread type of the steam tip. The steam tube and water tube do always have a protective rubber sleeve over them.

The steam and water valves have for almost every espresso machine model a different type of knob. These knobs can vary for the models such as the Cimbali M28, Cimbali M29, Cimbali M30, Cimbali M15 and the Cimbali M21. This spring is held in place with a steel D shaped spring.

La Cimbali espresso machine parts steam water valve

La Cimbali - Steam/water valve

La Cimbali M39 stainless steel steam pipe

On this page you will find a complete stainless steel steam tube for the La Cimbali M39 and La Cimbali M39 GT espresso machine. The part reference of this item matches the Cimbali part reference 985-748-000. This steam tube has been made from stainless steel. The tube itself has a diameter of 10mm, to protect your fingers from burning there is a rubber...
€36.04

Tap joint gasket 14.5x7.5x6 mm

On this page you will find a PTFE gasket which is the coupling between the steam and water valve ball and the compression spring inside the valve assembly. This item has the Casadio part number 485078010, the La Cimbali part number 485-078-010 and the Faema part number 485078010. This PTFE gasket, it is not white as you would expect with PTFE, has a...
€1.02

La Cimbali faema tap joint spring 11x24mm

On this product page you will find a stainless-steel water and steam valve compression spring. This spring has multiple purposes. It holds the steam and water wand at a fixed location and keeps pressure on the PTFE ball gasket. This compression spring can be used with the brands Casadio (485061010 ) Cimbali (485061010) and Faema (485061010) This...
€2.10

valve rod washer 21x16x1mm

The washer on this page is solely used on espresso machines manufactured by the La Cimbali Group. So you will find this OEM/Original washer on brands such as Casadio and Cimbali espresso machines.  The matching part numbers for this washer are for Casadio 590715000 and for La Cimbali 590-715-000  This washer makes sure that you can’t...
€1.10

O ring gasket 6x1.2mm

The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
€1.10

O ring gasket FKM 10.78x2.62mm

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....
€0.90

O ring gasket 10.82x1.78mm

On this page you can find a o ring which is in use with a variety of brands in various configurations. You can find this o ring in water and steam taps, boiler components and in water level assemblies. This o ring is made from EPDM. The used cord diameter is 1,78mm and the internal diameter of the o ring is 10,82mm. This o ring can be used on steam and...
€0.51

Cimbali steam wand 280mm

The item on this page is a stainless-steel steam tube which can be used on various La Cimbali espresso machine models. The part reference numbers for this item can be found in the extra info tab. This steam tube has been made from stainless steel. This steam tube does come with the fixing nut, rubber sleeve and the steam tip. This steam tip has in total...
€128.45

Faema E92 steam valve knob with ring

On this page you will find a steam and water valve handle knob for the Faem E92. The part reference for this item is 924828000. This steam and water valve handle is suitable for the left and right steam and water valve. The knob bodies of these items are not identical.
€52.32

La Cimbali steam tap knob

The steam and water valve knob on this page can be used on various Faema and La Cimbali espresso machines. The part reference for La Cimbali is 495-764-000 and for Faema 495764000. This steam wand water valve knob doesn’t come with the spring which holds the steam and water valve knob in it’s place. This item has been manufactured in Italy....
€34.23

Rubber protecting sleeve for 10mm steamtubes

The item on this page is a steam and water tube burn protecting sleeve. This specific model of sleeve can be used on various brands of the La Cimbali group such as Faema, Casadio and Cimbali. The part references for these brands are all 927132010 . This rubber grip is suitable for steam and water tubes which have a diameter of 10mm. this specific...
€9.95