Vibiemme Domobar Junior HX

The portafilter gasket shown on this page is used with various espresso machines of the Cimbali group and with Vibiemme espresso machines. the part reference numbers can be found in the extra info tab. This portafilter gasket has been made from NBR. The outer diameter is 74mm the inner diameter is 57,5mm and the thickness is 8mm. This gasket has 4...

Vibiemme water / steam valve axle 52mm

The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...

On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a...

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...

This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...

This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale,  La Scala, Nuova Simonelli, Victoria...

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...

If you want to attach a E61 style brewing group to the espresso machine there is normally a gasket inbetween the brewing group and metal frame. In this case a 2mm paper gasket with a width of 70 and a height of 80mm. This gasket type used on a variety of E61 style brewing groups from the brands: San Remo, Royal, Reneka, La Scala, Vibiemme, Grimac, Wega,...

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...

The portafilter on this product page is a OEM/Original Vibiemme spare part. The Vibiemme part reference for this double portafilter is ASPORTN2TAMON. This portafilter has a closed double spout, this cover can be removed for cleaning. The ear orientation on this portafilter is 90 degree. The thickness of the ears is 5,5mm. This portafilter does come with a...

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....