Vibiemme Domobar Junior HX

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...

This steam and water valve knob for your Vibiemme ( MANPRUSC ) Domobar Junior and Domobar Super. The outer dimensions of this knob are 35x35mm. note there is also a type knob available which has the dimensions 43x43mm. so slightly bigger. The internal hole of the steam and water valve knob is a square of 6x6mm. This steam and water tab knob can be used...

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....

This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....

The Vibiemme RACCCACOGR camme shaft holder on the manual Vibiemme espresso machines is also quite different then with a standard E61 style brewing group. This part is, similar to the drain sleeve, attached to the side of the brewing group with 2 M6 allen bolts. In the situation of the Vibiemme solenoid valve group in E61 style, this is a chrome plated...

On this page you will find a heating element suitable for the Vibiemme Domobar Junior (part number: ELETRESD1625). This element has a brass flange and a copper element. The element itself has a wattage of 1600W with a voltage of 230V. The immersed length of the element is 95mm. The flange has a OD of 1” ¼” . The element connection has 2 poles, these 2...

This a universal Polytetrafluoroethylene (PTFE) gasket with 22x16x2mm. The gasket is used on a variety of espresso machine components. This type of gasket found boilers, brewing group and valve assemblies. The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia,...

This brass nut has a female thread of 3/8” bsp and a height of 6mm. The outer size is 21 or 24mm, this can vary sometimes and can’t be selected. So where is this brass hex nut used in espresso machines? You can find this model hex nut mainly on water and steam taps of brands like, Royal, La Spaziale,  La Scala, Nuova Simonelli, Victoria...

On this page you will find a flat silicone gasket. This silicone gasket is 10x5mm.  It is being used in 2 applications with Vibiemme ( GUARSILRUDOSU ) espresso machines. The first is in the steam and water valve of the Vibiemme Domobar and in the expansion valve used in the Domobar super. If you are not sure if this silicone blind gasket is suitable for...

This brass casted boiler fitting is used on the bottom side of the heat exchanger (HX) of the espresso machine boiler. It attaches to the HX with a ½”male flat sided connection. The other ½”pipe connection is for the return pipe from the brewing group. The ¼”female thread on the bottom is for the injector tube. In this tube the fresh water is injected....

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...

The vibration manufacturer Ulka makes 230V vibration pumps for espresso machines. But they also make 120V vibration pumps for espresso machines. On this page you will find the Ulka EX5 vibration pump. This pump produces 41W with a 120V at 60Hz. The water inlet is a 6mm plastic fitting, the outlet of the pump is 1/8”BSP. The EX5 has a brass outlet...