Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

Rocket R58 espresso machine

This espresso machine is one of the few dual boiler coffee machines around, especially for a domestic coffee machine. But at some point in life the Rocket R58 will also break down and seals start to leak. On this page you can find the most of the parts for the Rocket R58 espresso machine

Rocket R58 espresso machine parts

Drain valve pre-assembled 52,8mm

The drain valve on this page is used in a variety of E61 style of brewing groups. You will find this model of drain valve assembly on brands such as Bezzera, ECM Heidelberg, Isomac, La Pavoni, Brasilia, Grimac and Royal. This drain valve comes pre-assembled. The assembly contains the triangular shaped shaft, gasket holder, gasket, flat washer and the...
€11.97

Compression spring 13x42mm

This stainless steel compression spring is used in the Faema E61 and E61 style brewing groups. But what does this specific do? Well this is the last compression spring in the brewing group. It is the compression spring in the brewing valve which closes the exhaust valve all the way at the bottom of the E61 brewing group. Besides the E61 group spring it...
€1.61

L fitting brass 1/8" MM

The fitting on this product page is a L fitting, this fitting can be used with a variety of espresso machine brands such as Brasilia, Cimbali, ECM Heidelberg, Faema and Rocket. This L shaped fitting has been made from casted brass which has been machined. After machining the brass has been nickel plated. The threads on both sides are a 1/8”BSP-G....
€2.53

Rocket steam valve complete

The item on this page is a original Rocket steam valve. This valve can be used on various models such as the Rocket R58, Rocket R-Cinquantotto. The Rocket part reference number for this steam valve is A227705093 This steam valve comes completely assembled including the knob. Note the insert of this knob isn’t part of this item. This steam valve has...
€149.55

Faema E61 valve gasket 15,5x7,5x4mm

This gasket is again such a standard type of gasket in the world of espresso coffee machines. It is the EPDM gasket 15.5x7.5x4mm. This gasket is used a variety of applications on espresso machines. Offcourse on the Faema E61 brewing group as well for the E61 style brewing group, as the camme shaft gasket. By brands like Isomac, Bezzera, ECM, Brasilia,...
€0.59

Drain valve chrome plated

This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61 style group is...
€5.90

PTFE gasket 21x16.8x2mm

The PTFE gasket on this page can be used on a variety of espresso machines brands and various applications. You will mainly find this gasket as a seal with water and steam valves, but you can also find them in brewing groups. This PTFE gasket has a outer diameter of 21mm a inner diameter of 16,8mm and a thickness of 2mm. You can use this flat gasket in...
€0.79

Rocket double portafilter

The portafilter on this product page can be used on a variety of Rocket espresso machines. The Rocket part reference for this item is A699905021. This portafilter is a 2 coffee model. The ear orientation of this portafilter is 90 degree. The thickness of these ears is 5,7mm.  The spout used is a 2 coffee one, which is closed but with a removable cover....
€36.29

E61 style camme rod

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
€16.14

PTFE gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.10

L Fitting brass 1/4" MM

On this page you will find a ¼”L fitting. This part is a generic item and is in use with a variety of espresso machine manufacturers. As mentioned earlier this is a L-fitting. Both threads a male ¼”BSP-G. The item is casted from brass, machined and nickel plated afterwards. That’s why it has a greyish colour. This type L...
€4.16

E61 upper pipe

The item on this product page is the upper drain sleeve. This drain sleeve can be used with a wide selection of E61 brewing groups. Such as with the brand Faema, ECM, ECM Heidelberg, Isomac, Pavoni, Rocket and San Remo. This drain sleeve has been made from machined brass. This has been afterwards been nickel and chrome plated. The fitting on the inside...
€35.12

Technical features on the Rocket R58

The Rocket R58 has quite a lot of technical features installed. In this case you mainly need to think of electronic temperature control. Most espresso machines make use of temperature control with a pressure switch

Dual boiler

The Rocket R58 espresso machine has, as one of the few, a double boiler. You normally only see this on the commercial high end espresso machines. But now on the Rocket R58 coffee machine. The small boiler, which has a 1400W heating element, is used for the water for the brewing group.

The boiler used for the steam and water boiler is a heating element, with the same wattage of 1400W, which has a different design the ones used on the coffee boiler. The total of 2800W of heating power is plenty enough of heating power.

E61 brewing group

The Rocket R58 is also fitted with a manual E61 style of brewing group, as you see with most domestic Rocket espresso machines. A lot of the parts used on the E61 style of brewing groups are universal, but there are also various which are unique to the brand Rocket.

Pump and motor

Where most domestic espresso machines, also from Rocket, use a Ulka vibration pump. The Rocket R58 doesn’t use a vibration pump. They use a pump and motor assembly. The motor is made by the Italian company RPM and the pump is made by Fluid o tech, but if you have a pump with similar specs you can also use that one as well.

Water tank

The water tank on the back of the Rocket R58 makes it possible that you don’t have to have a main water connection.  From this water tank the water is pumped into the water boilers of the espresso machine. This needs to be pumped, seen the boilers are pressurized.

Maintenance on your Rocket R58

Keeping your Rocket R58 espresso machine is good working condition is very important if you want to keep the quality of your espresso at a high level. Besides that keeping your coffee machine clean will also result in extending the longevity of the espresso machine.

Backflushing your brewing group

Backflushing your brewing group should be a daily routine if you want to keep your espresso machine in the best possible condition. For this you will need a blind filter filterbasket and a cleaner, such as the Puly Caff powder. For full instructions on how to clean your brewing group just check out Blog posts about this topic.

Descaling your boilers

With a typical Heat Exchanger (HX) espresso machine boiler it is possible that you descale your espresso machine via the water tank. But in the case of a dual boiler espresso machine we do advice to not do this. The most important thing is that you use a proper water filter for your Rocket R58, note: this does not prevent the build up of scale, but reduces a lot.

 

Rocket Milano R58 parts from Brooks

At Brooks we sell a variety of spare parts for the Rocket R58 espresso machine. This can be OEM/original spare parts, but also a variety of aftermarket parts. If you are not entirely sure which components you need for your espresso machines, don’t hesitate to contact us.