Filter by
Categories
Price
€ €
Filter

San Marco Part category

On this category page you will find a wide selection of La San Marco spare espresso machine parts. Models where these parts are suitable for are for instance the San Marco 85, San Marco 95, San Marco 100.

La San Marco is one of the few brands who develops their entire machine themselves, there are various brands which do use general used espresso machine parts.

You can find spare parts, suitable for La San Marco, like heating elements, flowmeters, gaskets, solenoid valves, portafilters and pressure switches.

If you still can’t find La San Marco part your looking for, don’t hesitate and contact us.

La San Marco Part category
Anti vacuum valve TV 1/4" Anti vacuum valve TV 1/4"

Anti vacuum valve TV 1/4"

This type of anti vacuum valve is one of the most common valves around. This valve is suitable for a variety of espresso machine brands like Casadio, La Carimali, San Marco, San Remo, La Cimbali, Grimac, La Spaziale and so on. This anti vacuum valve has a male ¼”BSP-G thread. The body of this anti depression valve has been made out of...
€7.65
compare
Quick-view
IMS La San Marco 3 cup filterbasket 18/20gr IMS La San Marco 3 cup filterbasket 18/20gr

IMS La San Marco 3 Cup Filterbasket 19-22gr

On this product page you will find a bigger double filterbasket which can be used for all La San Marco espresso machines. The La San Marco part reference for this item is 1460109 . This filterbasket is not just a double filterbasket. It is one of the competition series of IMS filtri. The part reference from IMS is B662TH32M. This stainless steel...
€22.82
compare
Quick-view
Flex pipe 1000mm 3/8 ff conical base Flex pipe 1000mm 3/8 ff conical base

Flex pipe 1000mm 3/8 ff conical base

On this page you will find a stainless-steel flex hose. The overall length of this flex hose is 1000mm. There are 2 fittings, both are a female 3/8” BSP-G.  Seen they are conical there is no need for a gasket. The hoses are rated for a maximum pressure of 10bar and a maximum temperature of 90°C
€14.24
compare
Quick-view
Gasket PTFE 11.6x8.1x4mm Gasket PTFE 11.6x8.1x4mm

San Marco Gasket PTFE 12x8x4mm

The gasket on this page is made from PTFE and is suitable for some steam and water valves on San Marco espresso machine models. Models such as the La San Marco 85 and La San Marco 95. The San Marco part reference for this item is 109050  Note this conical shaped PTFE gasket is only suitable for the older models of steam and water valve which have...
€0.77
compare
Quick-view
La San Marco hot water tube La San Marco hot water tube

La San Marco hot water tube

The item on this product page is a OEM/Original La San Marco spare part. This item is a complete water pipe assembly.  The part reference number for this item are 507132  and BRTUB0470. This water tube comes including the attachment nut. The overall length is 105mm, This item has been made in Italy. This water tube can be used on the San Marco...
€89.61
compare
Quick-view
La San Marco 95 stainless steel steam pipe La San Marco 95 stainless steel steam pipe

La San Marco 95 stainless steel steam pipe

The steam tube on this page is suitable for the La San Marco 95 espresso machine. The La San Marco part reference for this item is 206224 . The steam tube has been made from a stainless steel tube of 10mm. This tube does come with a rubber protected sleeve, this prevents from burning your fingers. The developed length of this tube is 210mm The...
€38.41
compare
Quick-view
La San Marco water valve...

La San Marco water valve joint washer 14mm

This item is a washer used in various steam and water valves of various La San Marco espresso machines. The San Marco part reference for this item is 205534 and CCMMIN2720. This washer is a articulation washer. The diameter of this washer is 14mm. This washer has been made in Italy. You can use this washer on the La San Marco 85, La San Marco 95,...
€4.73
compare
Quick-view
Fluid o tech rotary vane pump 3/8" 50L/h Fluid o tech rotary vane pump 3/8" 50L/h

Fluid o tech rotary vane pump 3/8" 50L/h

The pump on this page is one of the smaller type of rotation pumps made by fluid o tech. This pump model is also designated as “compact plus” but with NSF approval. The Fluid o tech part number for this pump is MA0052AGANN1800 As mentioned before that this one of the smaller types of pumps. This pump has a flowrate of 50 L/H and has also a...
€131.64
compare
Quick-view
Parker 3 way solenoid valve 220/230V Parker 3 way solenoid valve 220/230V 50/60Hz conical

Parker 3 way solenoid valve 220/230V

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...
€77.78
compare
Quick-view
La San Marco shower holder 5mm La San Marco shower holder 5mm

La San Marco shower holder 5mm

The shower holder diffuser on this page is a OEM/Original La San Marco spare part. The San Marco part reference for this item is 206823  The shower diffuser plate on this page has an outer diameter of 54mm and a height of 12mm. The central hole is 5mm. This original La San Marco shower holder diffuser plate is used on the La San Marco 105.
€34.23
compare
Quick-view
Parker 2 way solenoid valve 1/4" 1/4" 110V 50/60Hz Parker 2 way solenoid valve 1/4" 1/4" 110V 50/60Hz

Parker 2 way solenoid valve 1/4" 1/4" 110V 50/60Hz

The solenoid valve on this page is a water inlet valve made by the company Parker, this valve has been manufactured in Italy. The parker part number is 397484 This solenoid valve has a inlet and outlet which have a ¼” BSP-G thread in the inside. The orifice in the middle of this valve has a diameter of 3mm and is sealed off with a FKM...
€95.46
compare
Quick-view
La San Marco 105 Level gasket La San Marco 105 Level gasket

La San Marco 105 Level gasket

On this page you will find a silicone sight glass gasket suitable for the La San Marco 105 espresso machines. The part reference is 109150 This gasket has been made from clear/white silicone. The outer diameters are 20 and 17mm. The internal diameter is 14mm. The height is 9,5 and 4mm. This gasket has been made in Italy
€1.38
compare
Quick-view