Filter by
Categories
Price
Manufacturers
Filter

Vibiemme Part Category

On this category page you will find a wide selection of spare parts for Vibiemme espresso machines. This does include domestic and commercial espresso machines.

The espresso machines of VBM have a variety of steam/water valves, brewing groups, water inlet valves, electronics and heating elements.

Which is compatible with your espresso machine model depends on if it is a domestic espresso machine or a commercial. Seen the parts are different on a VBM Domobar then on a VBM Replica espresso machine.

You will find spare parts for VBM models such as the Vibiemme Cubo, Vibiemme Replica, Vibiemme Domobar Super, Vibiemme Chimaera, Vibiemme Silver, Vibiemme Evolution and the Vibiemme Lollo.

Vibiemme (VBM) espresso machine parts - part category

E61 shower screen old style 60mm

This article is one of the earliest designs of the 60mm shower screen. This shower screen is made by IMS CFDR070.  The border diameter is 60mm, it has a internal height of 15,7mm. The internal holes, 112 in total, have a diameter of 2mm Note: this is not a specialty coffee shower, but IMS also produces normal showers. This is, unlike other 60mm models, a...
€3.42

Steam and water valve fitting 3 threads

This brass valve fitting is one of the most used components for steam and water valves. You will find this item on a variety of brands such as Faema, Marzocco, La Scala, La Pavoni and Vibiemme. This brass fitting has in total 3 screw threads. 1 for fixing it to the valve body, 1 for fixing the valve to the machine and the other one for the valve knob....
€10.92

Asco (Sirai) pressure switch P302/6

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....
€83.48

E61 style camme rod

This camme rod for E61 style espresso machines is slightly different then the one used in the Faema E61. This one has a small guide pin at the end which goes inside the group. On the other side there is a squared off section for the lever arm. This section is 6x6mm. To hold the lever in place there is a M6 thread on the end for some sort of a nut. This...
€16.14

Parker 3 way solenoid valve 230V 50/60Hz with cable

On this product page you will find a parker 3 way solenoid valve which is slightly different then a conventional solenoid valve. This solenoid valve is mainly used on solenoid brewing groups of the brand Vibiemme. What makes it so different? This solenoid valve is pre-wired. The Parker part numbers of this item are 393134J and 393395J This solenoid valve...
€110.76

Steam water valve shaft gasket holder

The item on this product page is a steam and water valve shaft, including gasket holder. This item can be used on various espresso machine brands such as Marzocco, San Remo, Vibiemme, La Scala, Faema, La Pavoni. The part reference numbers can be found in the extra info tab. This steam and water valve shaft has been made from low lead content brass. On...
€7.74

Vibiemme/Faema bipolar push button 16A 250V

The switch on this page is used in various Faema and Vibiemme espresso machines. The bipolar switch is also slightly different then most switches. When it is in the off position you will see a green colour, when you push it into the on position it will become orange. Inside the switch is a rotating disc. The Vibiemme part reference for this item is...
€9.09

Portafilter gasket 73x57x9mm

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr) The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€3.33

PTFE gasket 3/8" 22x16.5x2mm

The item on this product page is a PTFE gasket. This gasket is used on a variety of brands with applications such as steam and water valves, sight glasses and brewing groups. you can use this PTFE gasket on brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Rancilio and Grimac. The part reference numbers can be found in the extra info tab. This...
€1.04

Vibiemme manual dosing device 3GRC 240V

This dosing unit is compatible with various Vibiemme espresso machine models. The Vibiemme part reference for this item is ELETDOSRECUMP. The device has been made by the Italian company Gicar, their part reference is 9.9.04.18G This unit is called the Dosatura Manuale, DELUXE 3GRC 240Vac. This unit is used for the manual versions, so without the...
€165.03

Safety valve 3/8" 1,8bar CE PED IV

The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE and PED...
€10.58