Filter by
Categories
Price
€ €
Filter

Vibiemme Part Category

On this category page you will find a wide selection of spare parts for Vibiemme espresso machines. This does include domestic and commercial espresso machines.

The espresso machines of VBM have a variety of steam/water valves, brewing groups, water inlet valves, electronics and heating elements.

Which is compatible with your espresso machine model depends on if it is a domestic espresso machine or a commercial. Seen the parts are different on a VBM Domobar then on a VBM Replica espresso machine.

You will find spare parts for VBM models such as the Vibiemme Cubo, Vibiemme Replica, Vibiemme Domobar Super, Vibiemme Chimaera, Vibiemme Silver, Vibiemme Evolution and the Vibiemme Lollo.

Vibiemme (VBM) espresso machine parts - part category
Safety valve 3/8'' 1,8 bar Safety valve 3/8'' 1,8 bar

Safety valve 3/8'' 1,8 bar

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...
€12.18
compare
Quick-view
Drain valve assembly Drain valve assembly

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€7.17
compare
Quick-view
External seeger stainless...

External seeger stainless steel 6mm

This shaft retaining ring is mainly used on the Astoria and Wega steam valve axles. This is done to keep the valve gasket holder attached to the valve axle. The part number used for this item by Astoria is 10001 and for Wega is it WY10001  This shaft retaining ring has a internal diameter of 6mm a external diameter of 12,3mm and a thickness of...
€0.64
compare
Quick-view
Vibiemme Lollo tea push button Vibiemme Lollo tea push button

Vibiemme Lollo tea push button

The button on this page is used on the Vibiemme Lollo espresso machine. This button is the Tea button. The Vibiemme part reference number for this OEM/Original part is ELETPULACKORN. This button has a diameter of 40mm and has a print on it for Tea. This button has been made in Italy.
€69.44
compare
Quick-view
Temperature probe 1/4" M Temperature probe 1/4" M

Temperature probe 1/4" M

On this page you will find a NTC thermistor sensor, or just NTC. These probes are connected to a PID, this sensor basically reads the temperature inside the boiler. This specific item is used with the Rocket R 60V and the Rocket R58 espresso machine (A199904679). But this NTC probe is also used in a variety of Vibiemme models like the Vibiemme Domobar...
€43.25
compare
Quick-view
O ring epdm 11,91x2,62mm O ring epdm 11,91x2,62mm

Knob M8x1,25mm

This small rounded off knob is used on steam and water valves, but also on handles of brewing groups. You can find this handle on a variety of brands such as Vibiemme, Wega, Astoria, Grimac, and ECM Heidelberg. This black knob has a high gloss finish. The thread inside is a M8 with a pitch of 1,25mm. The item has been made in Italy. You can use this...
€7.51
compare
Quick-view
Bush pipe ball Bush pipe ball

Bush pipe ball

On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...
€4.02
compare
Quick-view
Boiler top fitting 1/2" Boiler top fitting 1/2"

Boiler top fitting 1/2"

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...
€15.17
compare
Quick-view
Faema E61 valve rod spring Faema E61 valve rod spring

Valve rod spring 15x17mm

The compression spring on this page knows a variety of applications with various brands. You can use this spring with brands like Vibiemme, La Scala, Faema, Spaziale and Brasilia. As for instance on steam and water valves. The part references can be found in the extra info tab This stainless-steel compression spring has a outer diameter of 15mm and a...
€0.90
compare
Quick-view
O ring gasket 6x1.2mm O ring 6x1.2mm epdm

O ring gasket 6x1.2mm

The o ring on this page is used to seal off the steam tip from the steam wand at the bottom. You can find this o ring with a variety of brands like Spaziale, Astoria and Wega espresso machines. With the part numbers of Spaziale 08354, Astoria 12300013 and Wega WY12300013. This o ring has a cord diameter of 1,2mm and a internal diameter of 6mm. The o...
€1.10
compare
Quick-view
Heating element 1500W 230V Heating element 1500W 230V

Heating element 1500W 230V

On this product page you will find a heating element which is suitable for multiple espresso machine brands. This specific heating element can be used on a Vibiemme Superdomobar and a 1 group La Pavoni Pub. This heating element produces 1500W with 230V, the element has 2 connecting poles. The immersed length of the element is 160mm. This model is a screw...
€57.94
compare
Quick-view