Filter by
Categories
Price
€ €
Filter

San Marco Part category

On this category page you will find a wide selection of La San Marco spare espresso machine parts. Models where these parts are suitable for are for instance the San Marco 85, San Marco 95, San Marco 100.

La San Marco is one of the few brands who develops their entire machine themselves, there are various brands which do use general used espresso machine parts.

You can find spare parts, suitable for La San Marco, like heating elements, flowmeters, gaskets, solenoid valves, portafilters and pressure switches.

If you still can’t find La San Marco part your looking for, don’t hesitate and contact us.

La San Marco Part category
La San Marco 85 touchpanel 1 group La San Marco 85 touchpanel 1 group

La San Marco 85 touchpanel 1 group

On this product page you will find the push button assembly for the single group San Marco 85 espresso machine. The San Marco part reference for this item is 608066  This push button panel has in total 5 keys. The star like symbol is the continuous and programming button. The other 4 are the volumetric keys which can be custom set with the...
€154.99
compare
Quick-view
Parker 2 way solenoid valve 1/4" 1/4" DN 2,5mm 9W 220/230V 50/60Hz Parker 2 way solenoid valve 1/4" 1/4" DN 2,5mm 9W 220/230V 50/60Hz

Parker 2 way solenoid valve 1/4" 1/4" DN 2,5mm 9W 220/230V 50/60Hz

The solenoid valve on this product page is made by the company Parker. This solenoid valve is mainly used as a water inlet valve for filling the boiler for various espresso machine brands such as San Marco, Faema, Nuova Simonelli, Conti, Gaggia, Scala and La Spaziale. This solenoid valve is a 2 way solenoid valve. The in and outlet of this solenoid valve...
€82.93
compare
Quick-view
Anti vacuum valve 1/4" Anti vacuum valve 1/4"

Anti vacuum valve 1/4"

A Anti vacuum valve is used to prevent that the pressure switch is kicked in too early when heating up. This anti vacuum valve has a male screw thread of ¼” BSP. A anti vacuum valve exists out of multiple components. The body with the threads, in this case made from stainless steel. The plunger, made from brass. This plunger has also the...
€7.79
compare
Quick-view
Safety valve 3/8" 2.0 bar CE PED IV certified Safety valve 3/8" 2.0 bar CE PED IV certified

Safety valve 3/8" 2.0 bar CE PED IV certified

The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
€12.87
compare
Quick-view
Gasket PTFE 11.6x8.1x4mm Gasket PTFE 11.6x8.1x4mm

San Marco Gasket PTFE 12x8x4mm

The gasket on this page is made from PTFE and is suitable for some steam and water valves on San Marco espresso machine models. Models such as the La San Marco 85 and La San Marco 95. The San Marco part reference for this item is 109050  Note this conical shaped PTFE gasket is only suitable for the older models of steam and water valve which have...
€0.77
compare
Quick-view
Faema E61 engine RPM 300W 230V Faema E61 engine RPM 300W 230V

Exterior RPM motor 300W 220/230V

The espresso machine motor on this page is made by the Italian electric motor manufacturer RPM. This motor is intended to be used as a exterior motor, so that it isn’t installed inside the machine. The motor is a good motor to use with a vintage espresso machine like the Faema E61. Currently this coffee machine motor can be used on a variety of...
€249.91
compare
Quick-view
La San Marco 85 Stainless steel steam pipe La San Marco 85 Stainless steel steam pipe

La San Marco 85 Stainless steel steam pipe

The steam tube on this page is suitable for the La San Marco 85 espresso machine. The La San Marco part reference for this item is 206320. The steam tube has been made from a stainless steel tube of 10mm. This tube does not come with a rubber protected sleeve, you can install one if you want. The developed length of this tube is 240mm The fitting on the...
€50.65
compare
Quick-view
Safety valve 3/8" 1,8bar CE PED IV Safety valve 3/8" 1,8bar CE PED IV

Safety valve 3/8" 1,8bar CE PED IV

The boiler safety valve shown on this page can mainly be found on La Pavoni espresso machine boilers. The La Pavoni part reference for this item is 395221G This boiler safety valve has a male 3/8” BSP-G thread. The pre-set pressure is 1,8 bar and nonadjustable. The seal used is a FKM seal, when opened the steam outlet is 872 L/M. This valve is CE...
€10.58
compare
Quick-view
Lucifer solenoid valve 3 way base mounting 115V 50/60Hz Lucifer solenoid valve 3 way base mounting 115V 50/60Hz

Lucifer solenoid valve 3 way base mounting 115V 50/60Hz

The item on this page is a 3 way solenoid valve made by the brand Lucifer. This item is slightly different, seen it’s not a standard 220/230V model. But it is a 110V model. This 3 way valve can be used on a variety of espresso machine brands such as Casadio, Brugnetti, San Marco, La Scala, Cimbali, Grimac, Faema, Astoria, Nuova Simonelli, La...
€81.54
compare
Quick-view
Parker 3 way solenoid 110V 50/60Hz conical Parker 3 way solenoid 110V 50/60Hz conical

Parker 3 way solenoid 110V 50/60Hz conical

On this page you will find one of the most used brewing group solenoid valves in espresso machines. But this is instead of a 230V version a 115V version. This solenoid valve has been manufactured by the company Parker. The Parker parts reference for this solenoid valve is 393106J or 393111J This 3-way solenoid valve is a model with a flat flange, this...
€92.40
compare
Quick-view
La San Marco filterbasket 2 coffee 21gr La San Marco filterbasket 2 coffee 21gr

La San Marco filterbasket 2 coffee 21gr

The filterbasket shown on this product page is a 2 coffee filterbasket suitable solely for La San Marco espresso machines. The part reference for this item is 202118 and CCMFIL0110. This filter basket has been made by the Italian company IMS Filtri. The part reference for this basket from IMS is SM2T122. Note: this is not a competition basket. This...
€4.54
compare
Quick-view
valve rod washer 21x16x1mm valve rod washer 21x16x1mm

valve rod washer 21x16x1mm

The washer on this page is solely used on espresso machines manufactured by the La Cimbali Group. So you will find this OEM/Original washer on brands such as Casadio and Cimbali espresso machines.  The matching part numbers for this washer are for Casadio 590715000 and for La Cimbali 590-715-000  This washer makes sure that you can’t...
€1.10
compare
Quick-view