Filter by
Categories
Price
€ €
Filter

San Marco Part category

On this category page you will find a wide selection of La San Marco spare espresso machine parts. Models where these parts are suitable for are for instance the San Marco 85, San Marco 95, San Marco 100.

La San Marco is one of the few brands who develops their entire machine themselves, there are various brands which do use general used espresso machine parts.

You can find spare parts, suitable for La San Marco, like heating elements, flowmeters, gaskets, solenoid valves, portafilters and pressure switches.

If you still can’t find La San Marco part your looking for, don’t hesitate and contact us.

La San Marco Part category
La San Marco group shower EN gasket 51x19x1mm La San Marco group shower EN gasket 51x19x1mm

La San Marco group shower EN gasket 51x19x1mm

This group gasket is used in various older La San Marco espresso machines. This gasket goes between the brewing group and the shower holder plate itself. There is no part reference number available for this item. This gasket is made from a universal type of carbo gasket material. The outer diameter is 51mm the inner diameter is 19mm and the thickness is...
€1.80
compare
Quick-view
Parker 2 way solenoid valve 1/8" 1/8" 230V Parker 2 way solenoid valve 1/8" 1/8" 230V

Parker 2 way solenoid valve 1/8" 1/8" 230V

On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443. This solenoid valve is a version which has a female threaded in...
€82.93
compare
Quick-view
Gicar flowmeter 1/4D 1,15 connector with led Gicar flowmeter 1/4D 1,15 connector with led

Gicar flowmeter 1/4D 1,15 connector with led

The flowmeter on this page is one of the most commonly used flowmeters in espresso machines. This flowmeter has been manufactured by the Italian company Gicar, so also made in Italy. In the extra field tab next to this text you will see a entire list of compatibilities with other models and brands. This specific flowmeter does not come with a fixed wire,...
€55.65
compare
Quick-view
Safety valve 3/8" 2.0 bar CE PED IV certified Safety valve 3/8" 2.0 bar CE PED IV certified

Safety valve 3/8" 2.0 bar CE PED IV certified

The most important part on a espresso machine is the safety valve. This part prevents that a boiler can explode. The safety valve will open up when the pressure inside the boiler becomes too high. This specific safety valve is made out of brass. The thread type used for this safety valve is 3/8”BSP-G. The calibrated pressure of the valve is 2.0...
€12.87
compare
Quick-view
La San Marco steam/water valve pushing ring La San Marco steam/water valve pushing ring

La San Marco steam/water valve pushing ring

The item on this product page is part used on the steam and water valves used on La San Marco espresso machines. On one side this brass part holds a ptfe sealing gasket, on the other side it accommodates a compression spring. The La San Marco part reference numbers for this item are 205009 and CCMMIN1350. This gasket holder/spring guide can be used...
€3.13
compare
Quick-view
Filterholder gasket shim 0.8mm 64x53mm Filterholder gasket shim 0.8mm 64x53mm

Filterholder gasket shim 0.8mm 64x53mm

On this you will find a paper seal/shim or filler. These paper shims are a handy and cheap solution to fix your portafilter gasket problems. When you use your portafilter the lugs and the bayonet like system of the group wear. So when you use a standard thickness of portafilter gasket it is possible that your portafilter doesn’t seal or goes too...
€0.77
compare
Quick-view
IMS La San Marco 3 cup filterbasket 18/20gr IMS La San Marco 3 cup filterbasket 18/20gr

IMS La San Marco 3 Cup Filterbasket 19-22gr

On this product page you will find a bigger double filterbasket which can be used for all La San Marco espresso machines. The La San Marco part reference for this item is 1460109 . This filterbasket is not just a double filterbasket. It is one of the competition series of IMS filtri. The part reference from IMS is B662TH32M. This stainless steel...
€22.82
compare
Quick-view
Solenoid valve connector Solenoid valve connector

Solenoid valve connector

The product on this page is a solenoid valve connector, large F fitting. With this connector you can seal off and connect your wiring and solenoid valve to each other. These connectors can be used on all types of standard solenoid valve coils. Where the positive and negative are spaced apart approx. 17mm. This solenoid valve connector can be basically...
€2.77
compare
Quick-view
Ode solenoid valve 3 ways base mounting 220/230V 50/60Hz 15bar Ode solenoid valve 3 ways base mounting 220/230V 50/60Hz 15bar

Ode solenoid valve 3 ways base mounting 220/230V 50/60Hz 15bar

Most of the pump driven espresso machines use a 3 way solenoid valve the control the brewing process. On this page you will find a ODE solenoid valve made by the Italian company ODE. The solenoid valve number is: 31A1AR15-VORV This specific model is a flanged model. So it is bolted against a flat machined surface with 4 allen bolts. These surfaces are...
€67.63
compare
Quick-view
La San Marco non return valve La San Marco non return valve

La San Marco non return valve

The item on this product page is a OEM/original San Marco spare part. this is a non return valve used in various models of La San Marco. The part reference numbers of San Marco are 400029, 400029A, BVASS2280 and BVASS2290. This non return valve is used on the water inlet tap. This item has been made from casted brass which has been machined afterwards....
€152.23
compare
Quick-view
La San Marco PTFE heating element gasket 56x46.5x3mm La San Marco PTFE heating element gasket 56x46.5x3mm

La San Marco PTFE heating element gasket 56x46.5x3mm

The gasket on this page is a heating element gasket which can be used on various La San Marco heating elements. The La San Marco part reference for this item is 109081  This gasket is made from PTFE and has outer diameter of 56mm a inner diameter of 46mm and a thickness of 3mm. This gasket can be used on the triangular flanges which are 82x82mm....
€3.11
compare
Quick-view
La San Marco level probe La San Marco level probe

La San Marco level probe

The level probe on this page is a OEM/Original La San Marco spare part. This level probe has the part reference of CCMMIN0030 and 202237. This level probe is installed in the boiler flange of various La San Marco espressomachines. Seen the location it isn’t straight, but slightly bent. The probe itself has been made from stainless steel. The...
€49.96
compare
Quick-view