Filter by
Categories
Price
€ €
Manufacturers
Filter

Vibiemme Part Category

On this category page you will find a wide selection of spare parts for Vibiemme espresso machines. This does include domestic and commercial espresso machines.

The espresso machines of VBM have a variety of steam/water valves, brewing groups, water inlet valves, electronics and heating elements.

Which is compatible with your espresso machine model depends on if it is a domestic espresso machine or a commercial. Seen the parts are different on a VBM Domobar then on a VBM Replica espresso machine.

You will find spare parts for VBM models such as the Vibiemme Cubo, Vibiemme Replica, Vibiemme Domobar Super, Vibiemme Chimaera, Vibiemme Silver, Vibiemme Evolution and the Vibiemme Lollo.

Vibiemme (VBM) espresso machine parts - part category
Vibiemme Replica push button 230V Vibiemme Replica push button 230V

Vibiemme Replica push button 230V

If the touch panel unit of your Vibiemme Replica and the Vibiemme Cubo espresso machine is broken, you likely need a new one. The specific model is made by Italian manufacturer Gicar (9.9.08.71G). This specific model doesn’t have a finished front, seen it is installed behind a metal plate with holes in it for the push buttons. The push buttons do...
€90.31
compare
Quick-view
Boiler top fitting 1/2" Boiler top fitting 1/2"

Boiler top fitting 1/2"

The top HX boiler fitting, a generic item you will find with a lot of espresso machine brands. This ranges from Vibiemme, Grimac, Pavoni, La Scala to Expobar, Brasilia and BFC. This specific item is a casted brass fitting. The side which is screwed into the HX is a ½”BSP-g and the side where the tube to the brewing group goes to is also a...
€15.17
compare
Quick-view
Bush pipe ball Bush pipe ball

Bush pipe ball

On this page you will find a brass steam pipe bushing. But what is a pipe bushing. A pipe bushing makes it possible to move the steam and water wand freely without leaking. So how does it work? Well the pipe bushing has on the valve side 2 o rings, these seal against the side of the inside of the valve. But on the top ring of the pipe bushing there is...
€4.02
compare
Quick-view
Bremas main power switch 20A 0-1-2-3 Bremas main power switch 20A 0-1-2-3

Bremas main power switch 20A 0-1-2-3

On this page you will find a main power switch for a espresso machine. In this case the switch is manufactured by the Italian company Bremas (CS0179505). The specific switch is a espresso machine switch with 3 positions. 0-1-2-3. It is rated at 300V with 16 amp. The switch is provided with the switch itself, mounting plate and transparent cover plate and...
€131.64
compare
Quick-view
Red pilot light 250V Red pilot light 250V

Red pilot light 250V

On this page you will find a red indicator light used in a variety of Vibiemme espresso machine models. The Vibiemme part reference for this item is ELETLAMSP22GC. This red indicator light is a 250V model. The head of the light is 20mm. The hole needs to be 10mm. It is rated up to 120°C. This light has been made in Italy. You can use this red...
€4.16
compare
Quick-view
Vibiemme water inlet valve body Vibiemme water inlet valve body

Vibiemme water inlet valve body

The item on this product page is a Vibiemme water inlet valve body. The Vibiemme part reference number for this item is RACCCOVANORIT. This item is a machined brass casting. There are no gasket holders nor springs inside this valve body. This item has been made in Italy. You can use this valve body on the Vibiemme Cubo, Vibiemme Dosaplus, Vibiemme...
€27.69
compare
Quick-view
Hardened steel insert Hardened steel insert

Hardened steel insert

The item on this page is a hardened steel bush used on various steam and water valves. This item can be used on brands such as Vibiemme, Marzocco, ECM Heidelberg and Fiorenzato. The ECM Heidelberg part reference number is P6003.2, for Fiorenzato it is A2200265, for Marzocco it is B.1.004/2 and for Vibiemme it is RACCINSRUBLOL. This steel bushing has...
€4.16
compare
Quick-view
Parker 2 way solenoid valve 1/8" 1/8" 230V Parker 2 way solenoid valve 1/8" 1/8" 230V

Parker 2 way solenoid valve 1/8" 1/8" 230V

On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443. This solenoid valve is a version which has a female threaded in...
€82.93
compare
Quick-view
Faema E61 group infusion spring 14x45mm Faema E61 group infusion spring 14x45mm

Faema E61 group infusion spring

On this page you will find a stainless steel compression spring with a outer dimension of 14mm and a length at rest of 45mm. This compression spring is being used in a variety of espresso machine brewing groups. This ranges from the famous Faema E61 brewing group, the E61 style brewing group. But also a variety of other type of brewing groups used by...
€1.29
compare
Quick-view
Elbow fitting 1/4" MM Elbow fitting 1/4" MM

Elbow fitting 1/4" MM

The item on this page is a brass elbow fitting. This fitting can be used on various espresso machine brands such as Faema and Vibiemme. The Vibiemme part reference for this item is RACCP429. This elbow fitting has on both sides a ¼” BSP-G thread. But on 1 side it has a flared connection instead of a conical connection. This item has been...
€8.21
compare
Quick-view
Vibiemme level probe 140mm Vibiemme level probe 140mm

Vibiemme level probe 140mm

The item on this product page is a level probe which can be used on a variety of Vibiemme espresso machines. The Vibiemme part refence number for this item is ELETSON. This level probe has a male ¼” fitting and a overall length of 140mm. This level probe has a 90 degree angle at the connector. This level probe can be used on a variety of Vibiemme espresso...
€11.69
compare
Quick-view
Non return valve triangular Non return valve triangular

Non return valve triangular 6.5mm

The triangular non return valve on this page can be used in La Spaziale and Vibiemme espresso machines. This brass made part holds a small o ring which is 1,78x8,73mm. The o ring seals off the non return valve and non return valve makes sure that the water van only flow one way. The triangular shaped non return valve has a diameter of 6,5mm and 12mm. The...
€5.41
compare
Quick-view