Filter by
Manufacturers
Type part
more... less
Type
Price
Filter

Rocket Giotto espresso machine

The Rocket Giotto espresso machine is one of the more popular espresso machine made by Rocket Milano.  But you do need to keep in mind that there are various versions of this espresso machine available. Below you will find a overview of the various models of the Rocket Giotto.

Rocket Giotto spare parts

E61 chromed group collector

The drain valve on this page can be used on various E61 style of brewing groups. Models such as ECm, ECM Heidelberg, La Pavoni, Rocket and Vibiemme espresso machines. Not on the Faema E61 This drain valve has been machined from a single piece of brass. After that it has been polished, nickel plated and finally chrome plated. This item is made in Italy....
€52.47

Faema E61 camme spring 15x25mm

This stainless steel compression spring with the dimensions of 15x25mm is normally used as a camme spring on a Faema E61 brewing group or on E61 style brewing groups.  Like with the Faema E61, Faema E61 legend, Grimac, Isomac, Pavoni, Wega and a variety of other brands which use a e61 style of brewing group. Besides that option, this model...
€1.21

E61 style group drain valve disk

The drain valve disc on this product page is only used in a few E61 style of brewing groups. You can find them with espresso machine brands such asLa Scala, Bezzera, ECM Heidelberg, La Pavoni, Rocket, Grimac and Isomac. This brass disc can be found at the bottom of the drain of various e61 groups. The brass disc has a outer diameter of 15mm and 8mm. the...
€2.77

Fitting brass 1/8" x 1/8" MM

The brass fitting on this page is a double male one and is used on various espresso machines. such as ECM Heidelberg, Profitec and Rocket. This fitting has been made from machined brass. On each side is a male 1/8” BSP-G thread. This fitting can not be used on flared tubing. This fitting has been made in Italy.
€3.05

Rocket water tank 263mm

The water tank on this product page is a OEM/Original Rocket spare part. The Rocket part reference for this item is R899905144 This Rocket water tank is complete, as shown in the Rocket parts diagrams. The dimensions are for the width on the low side 190mm and on the top 195mm. The depth at the bottom is 70mm and at the top it is 75mm. The Height of the...
€117.72

L Fitting brass 1/8" MF

The fitting on this page is a L fitting. This fitting has a male and female thread and can be used on various applications. The male thread is a 1/8” BSP-G thread and the female side is a 1/8’BSP-G thread as well. This L fitting has been casted and machined out of brass. It is possible that it comes nickel plated. This item has been made in...
€2.58

PTFE gasket 26x21x2mm

This gasket has been made from the fibre material AFM 34 in Germany. This gasket has a outer diameter of 26mm a inner of 21 and a thickness of 2mm. This gasket is used in a variety of components throughout a espresso machine. The most common place where this coffee machine gasket is used, is in the Faema E61, Faema E61 legend and E61 style brewing groups....
€1.10

Faema E61 group upper plug

On the top of a Faema E61 brewing group or a E61 brewing group is always the final item. That’s a chrome plated 3/8” male plug. Nothing else nor something special. This is generic part which can also be used in a variety of situations then a E61 brewing group, but also on different locations on a espresso machine. Like on the boiler with a...
€4.10

Ulka Vibration pump EX5 230V 50/60Hz with brass outlet

On this page you will find one of the most used espresso machine pumps. The Ulka Ex5 48W 230V espresso machine vibration pump. This pump produces 48W at 230V with 50Hz. The inlet connection is 6mm, suitable for a silicone hose. The pump outlet is a 1/8” Bsp, this side is made from brass. There is also a Identical pump the Ulka EP5, this one has a...
€34.78

Drain valve assembly

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...
€7.17

Rocket water manifold

The item on this product page is a water inlet manifold, which is a OEM/Original Rocket spare part. The Rocket part reference for this item is A439905147 This drain cup has in total 3 hose connections and a grounding pin on the other side. In the bottom has a metal inert installed, so that the threads don’t wear out.  This item has been made...
€19.84

This model of espresso machine is build in various applications, which also means that the spare parts for the Giotto are the same. There are a lot of similarities between the models, which is a huge advantage.

The Rocket Giotto types

The Rocket giotto espresso machines can be divided into two model types, the Evoluzione and Cronometro. These 2 model types can be divided into 2 versions, a R and a V version

Rocket Giotto Evoluzione V2

This espresso machine is a single group model, ideal for a Home barista. It is fitted with the famous E61 style brewing group. On the front plate you have a on off switch, pump pressure manometer and a boiler pressure manometer. Including indication lights.

The boiler you find on the Giotto Evoluzione is a horizontal boiler, with a heat exchanger (HX) diagonally installed. The heating element installed in this boiler is a 1200W model, this can be a 230V or a 115V version. The temperature inside the boiler is controlled with a pressure switch and not with a electronic temperature controller.

The Giotto Evoluzione is fitted with a water tank on the back, so you don’t have to have fixed plumbing in you kitchen. The water from this tank is pumped into the boiler, seen it is pressurized. This is not done with a vibration pump, but with a full commercial pump. So it has a motor and pump installed in this compact espresso machine. with this your espresso’s will be even better then with a regular vibration pump.

Rocket Giotto Cronometro

This version of the Rocket Giotto is called the Cronometro. This model comes in 2 types. The less expensive model is fitted with a vibration pump, model V. The more expensive one is the model R, which comes with a full pump and motor confirmation like you would find on commercial espresso machines.

The main difference between the Giotto Cronometro and the Giotto Evoluzione is that the Cronometro controls the temperature of the boiler with a temperature controller, instead of with just a pressure switch. For that reason you do also find a Solid State Relay(SSR) in this espresso machine, this SSR controls the heating element.

This version of the Giotto does also come with the iconic E61 style of brewing group, the advantage of this is that quite some parts are interchangeable with other e61 style of brewing groups. But we need to point out that with the brewing groups of Rocket some of the parts are not interchangeable anymore, seen they are unique to the brand

Spare parts at Brooks for the Rocket Giotto coffee machine

Brooks sells a variety of spare parts for Rocket Giotto espresso machines, this can be OEM/Original spare parts but also various after market ones. If you can’t find the spare parts your looking for on our website, don’t hesitate to contact us so that we can help you out.