Filter by
Price
Manufacturers
Type part
more... less
Type
Filter

Astoria coffee machine spare parts

Our range of Astoria coffee machine parts

At Brooks, we sell a wide range of Astoria CMA brand coffee machine parts, many of which are compatible with Wega's espresso machines. Which in itself makes sense, considering Wega is part of the Astoria CMA group.

The type of parts we can supply range from the different sizes of filter carrier for Astoria espresso machines, as there are multiple types of brewing groups. The various electronic components, such as dosing units, level controllers and pressure switch panels.

In addition, we can also provide a variety of barista accessories and water filters that you can use with your Astoria espresso machine.

Astoria CMA espresso, coffee and grinder parts

RPM pump motor 165W 230V 50/60Hz

This espresso machine motor is made by the Italian company RPM (model number 11002728). The motor itself has 165W with 230V 50/60hz. To power the motor up it has a capacitor of 10 µf. This is one of the more standardized espresso machine motors and is being used by a variety of coffee machine manufacturers. This ranges from brands like Astoria,...
€208.17

Adapter kit for motor to clasp pump

The product on this page is a set of individual components which are used for coupling a espresso machine pump to a motor. This specific model is a OEM/Original Astoria CMA part. The Astoria part number for this item is 83260016R  and the Wega part number is WY83260016R  This set consists of a stainless steel motor to pump coupling. A shaft...
€26.30

Astoria Wega steam valve gasket holder

This steam and water tab gasket holder can be used in almost every steam and water valve used by the espresso machine manufacturer Astoria CMA. This item can be found in Astoria espresso machines with part reference 25616 and with Wega espresso machines under the reference WY25616. This gasket holder has on one side room for the flat gasket with the...
€7.51

Astoria Wega steam water valve complete 91mm

The steam and water valve on this page can be used with various model of Astoria CMA. So the brands Astoria and Wega. The matching part number for this item for Astoria machines is 56100R and for Wega espresso machines W10582  This model is the long version with a length of axle of 91mm.(Astoria part nr. 56100R Wega part nr. WY56100R)....
€53.71

Astoria/Wega pressure switch 1,5 bar 1/8"

The pressure switch on this product page is used on various Astoria and Wega espresso machines. This OEM/Original spare part has the Astoria part reference number 20158 and the Wega part reference number WY20158. This pressure switch is the ES31. It has been pre-set at 1,5bar. The fitting on the bottom is a 1/8” male thread. It is fitted with...
€51.35

Astoria/Wega water level nut 1/2" 12mm

This page shows the water level nut for a Astoria and Wega sight glass. This nut makes sure that the sight glass stays in place and seals properly. If the nut is screwed down the sight glass seal will slightly compress and seal off the sight glass. The part number for this item is for Astoria is 25383 and for Wega WY25383  This sight glass nut...
€6.68

Parker 3 way solenoid valve 220/230V

This 3 way solenoid valve is one of the most commonly found solenoid valves. The part is produced by Parker in Italy. This valve is mainly used as a brewing group solenoid valve. The remaining water from the group comes out of the outlet at the top. The Parker part numbers for this item are 393107J and 393112J This solenoid valve is a 3 way valve. The...
€77.78

Wega Orion steam valve knob

This OEM/Original steam valve knob is used on various Astoria and Wega espresso machine. The Astoria part reference for this item is 15254 and the Wega part reference is WY15254. This steam knob has in the middle of the knob a square pin hole of 6x6mm. this item has been made in Italy. This steam valve knob can be used on the Astoria Dora, Astoria...
€16.14

Filter for pump 3/8" M 3/8" M

The item on this page is a espresso machine pump filter. Not suitable for a vibration pump. This item can be used on basically every espresso machine pump which has a 3/8” BSP-G Thread. But you will see this type of pump filter on Astoria and Wega espresso machines. The part number 56116 for Astoria and for Wega the number WY56116. This filter has...
€8.91

Safety valve 3/8'' 1,8 bar

On this page you will find a boiler safety valve 3/8” male with a present of 1,8 bar. This safety valve is, at own responsibility, adjustable. This can be done by tightening or untightening the Allan key slot in the top of the valve. Inside this safety valve has a stainless steel spring inside, the sealing material is FKM. This is a non certified...
€12.18

IMS filter basket removal tool

When you want to clean your portafilter at the end of the day you need to remove the filter basket from the portafilter. But these baskets are normally held in place with the internal spring and can be difficult to remove. Instead of removing the basket with a spoon IMS Filtri has made a filter basket removal tool. This tool is made from stainless...
€8.91

Astoria/Wega dosing device Dosatura 3GR+LIV+TEA 240Vac

The item on this page is a dosing device which is used on various brands of the Astoria CMA group. You can use this dosing device on the brands Astoria and Wega. The Astoria part reference number is 18090031 and the Wega part reference number is WY18090031. The Gicar part reference number is9.5.21.20G This unit is made by Gicar and is called the...
€473.94

History of Astoria

The Astoria CMA group, to which Astoria belongs, was founded in 1969 by Nello dal Tio. One of the best-known brands of the Astoria CMA group is Wega, which has existed since 1985.

Astoria CMA group is one of the largest manufacturers of commercial espresso machines, it might also have to do with the fact that they are multiple brands. Specifically, these are semi automatic espresso machines and models that have a lever brew group.

The coffee machine brand Astoria has built a variety of models over the years such as the dual boiler coffee machine Astoria Plus 4 you, as well as the somewhat traditional machine such as the Astoria Argenta and the Astoria Divina.

 

Advantages of original parts

Using genuine Astoria CMA coffee machine parts may have advantages, but this is by no means a requirement. In many cases, aftermarket parts will function exactly the same.

 

Fit and compatibility

It is often the case that Astoria CMA original parts fit just a little better, in part because they are the company that designed the products. That absolutely does not mean that aftermarket parts cannot be used. If a part is defined as compatible with a specific Astoria part number, it is simply compatible. In addition, Astoria CMA, like many other espresso machine manufacturers, uses universal parts which are identical parts. But a fraction of the price.

 

Extended lifespan

Using the right parts for your Astoria espresso machine will also extend the life of your coffee machine. But you can use OEM/Original parts for repairs, but if you do not perform regular maintenance or use a water filter/softener for your coffee machine, the machine will start to show technical defects.

So the most important thing is periodic maintenance on your Astoria espresso machine and using OEM Astoria CMA coffee machine parts.

 

Astoria coffee machine parts order at Brooks

At Brooks Parts, we sell a wide range of Astoria espresso machine parts. These can be OEM/original parts as well as aftermarket parts. There can be price differences in these, though. In addition, you run into the problem that some original parts can have a long delivery time. In some cases, older components have also been discontinued.

If you can't find the part you're looking for, please feel free to contact us so we can help you, or else check out our blog page to see if you can find more information there